SPINDLE MOUNTED FLAP WHEEL Aluminum Oxide Multi-layer - SPINDLE MOUNTED FLAP WHEEL - FINE POLISHING TOOLS

Many factors of non-woven abrasive are in the radioactive arrangement, each layer comnes into line and be compacted, ensure long working life.

There are abrasive blades between two layers.

Increase grinding ability and generate quite coarse grinding effect

Product Advantages High flexibility High abrasive ratio brought by coated abrasive. Even blades loss, and no residue on the work-piece. Special structure of flap wheel with shaft makes closer working to the work-piece.	Application Tools, mould and fine grinding. Trunk, tin and difficult contact area grinding in manufacturing processing equipment. Non-ferrous metal or light weight alloy valve and accessories precision finishing.	Usage Advice Perform best grinding at 15-20m/s speed. Obtain best balance of grinding ability, surface fine finishing quality, low work-piece temperature. Different material with corresponding grinding oil can highly increase the coated abrasives working life

Affecting factors of grinding
Tool wearing and work-piece temperature load	Material grinding ratio	Surface roughness
Decrease grinding pressure, circular velocity and add grinding oil can low tool wearing and down temperature of work-piece	To gain higher grinding ratio, suggest to use rough grit instead of increasing contacting pressure.	Apply high grinding speed could gain bright and clean surface. Increasing contact pressure leads to more coarse surface.

Size		Grades Available	PCS/BOX	PCS/CTN	M/S	EAN-CODE
Dia	Material	Grades Available	PCS/BOX	PCS/CTN	M/S	EAN-CODE
30x20x6	Aluminum Oxid	Coarse Medium Fine Very Fine	10	300	80m/s	PFW302006NWA
30x20x6			10	300	80m/s	PFW302006NWA
40x25x6			10	300	80m/s	PFW402506NWA
50x25x6			10	300	80m/s	PFW502506NWA
50x40x6			10	300	80m/s	PFW504006NWA
60x30x6			5	150	80m/s	PFW603006NWA
60x40x6			5	150	80m/s	PFW604006NWA
80x50x6			5	150	80m/s	PFW805006NWA

Aluminum Oxide Multi-layer