Flexible structure to meet the needs of the workpiece contour and shape
Open-ended material can be prevented from clogging hot corrosion under high pressure.
Without corrosive residues on the wrokpiece surface
Removing rust, corrosion spots, dirt, stubborn paint spots, or chemical residues, old coating glue, sealant, gasket residue
Cleaning welds and blueing material, especially the blueing stainless steel surface after hot-corrosion.
Cleaning the Filler surface
Mounted wheels will achieve the best grinding performance under 15-20M / S speed, with fine surface, low temperature of the workpiece, and the best balance.
|Factors Affecting Grinding Effect|
|Tool wear and workpiece temperature load||Material removal rate||Surface roughness|
|Reducing grinding pressure and the circumferential speed , Also adding lapping oil can reduce tool wear and workpiece overheating||To achieve higher removal rates, a more coarse grit was recommended to use ,rather than increase the contact pressure, as the pressure will cause the tool to be excessive wear and overheating||Using high operation speeds to be the more smooth surface. But to increase the contact pressure will be more coarse surface|
To ensure safety, Please do not exceed the marked maximum speed