' SPINDLE MOUNTED FLAP WHEEL
SPINDLE MOUNTED FLAP WHEEL
SPINDLE MOUNTED FLAP WHEEL
Connecting Shaft
50x6
Code:PRWCS5006A
Replace without removing the shank from the machine, which can reduce installation time significantly.
Share:

 

Replace without removing the shank from the machine, which can reduce installation time significantly.
Connecting Shaft Size:6mm

 

Product Advantages  

Application

 

Usage Advice

Flexible structure to meet the needs of the workpiece contour and shape
Open-ended material can be prevented from clogging hot corrosion under high pressure.
Without corrosive residues on the wrokpiece surface
 
 
Removing rust, corrosion spots, dirt, stubborn paint spots, or chemical residues, old coating glue, sealant, gasket residue
Cleaning welds and blueing material, especially the blueing stainless steel surface after hot-corrosion.
Cleaning the Filler surface
 
 
Mounted wheels will achieve the best grinding performance under 15-20M / S speed, with fine surface, low temperature of the workpiece, and the best balance.
Factors Affecting Grinding Effect
Tool wear and workpiece temperature load   Material removal rate   Surface roughness
Reducing grinding pressure and the circumferential speed , Also adding lapping oil can reduce tool wear and workpiece overheating   To achieve higher removal rates, a more coarse grit was recommended to use ,rather than increase the contact pressure, as the pressure will cause the tool to be excessive wear and overheating   Using high operation speeds to be the more smooth surface. But to increase the contact pressure will be more coarse surface
Safety Notes
To ensure safety, Please do not exceed the marked maximum speed
         
   

 

 
 
 

 

Size Grades
Available
PCS/BOX PCS/CTN M/S EAN-CODE
Dia Material
50x6 Aluminum
Oxid

Purple
Blue
Black

15 300 80m/s PRWCS5006A
75x6 10 200 80m/s PRWCS7506A

 

 

PERSONAL DETAILS
Name Phone
E-mail
Message
HOME | PRODUCTS | SOLUTION | SUPPORT & SERVICES | VIDEO | COMPANY | CONTACT US | MAP

2014 PEGATEC 

  • Skype Me!