4"Multi-purpose Cutting Wheels 1,0/1,6mm

In metalworking industry, there are hundreds and thousands work pieces waiting for processing. We use different abrasives wheels for different work piece. If the worker uses only one kind disc to deal with unmatched work piece, it will cause pollution to the surface of work piece.And the instant information is that it is hard to cut, the life of abrasive disc is so short which result in changing the disc frequently, and a series problems which the worker can’t solve themselves. Thus, it reduces the working efficiency. In order to solve this difficulty puzzling to the whole manufacturing industry, PEGATEC introduces a marvelous product-SCISSORSHAND after several years’ development. The SCISSORAHND can almost cut any material in the market and the performance is excellent.

BEFORE

PERFORMANCE

• Product Advantages

  Super Long durability

  High-speed cutting

  No need to change the wheels even for different material’s cutting.

  Comfortable cutting experience

  Economic

  Packed with Anti-damping Sealed box(part of the products)

• Application

  Material of Thin-walled tube

  Various section bars

  Material of Solid Pipe

  Various Plates

• Cutting Material

  Stainless Steel、acid-resistant steel

  Tool steel

  High-tensile structural steel

  Aluminium Alloy, Aluminium, Copper

  Rigid plastic, PVA

  Concrete, Brick

You can use SCISSORSHAND to achieve the following result.

• 

  Soft Work Piece:

  SCISSORSHAND can cut a 12mm steel rebar in 4 seconds, and only lost 5% after cutting 3X3 L shape steel 30 times
• 

  Stainless Steel:

  It has high requirement to the surface finish. The workers don’t like burr and burn stains on the surface after cutting. It will mean re-working. With high efficiency of cutting, SCISSORSHAND will make no burr and burn stains.
• 

  Aluminium:

  The normal cutting disc can’t be used for aluminium material. The 100% purity aluminium is very soft, it will block the hole on the surface of cutting disc. In this case, the cutting disc will slip and never end. SCISSORSHAND shows the advantage obviously at this time, it cuts aluminium smoothly and left no pollution to the surface. It also easy to cut the aluminium allo
• 

  Cast iron and stone:

  Cast iron is of high hardness. There is a common feature of cast iron and stone-fragile. This high hardness and fragile material requires highly to the cutting disc which should ensure the durability. SCISSORSHAND optimizes the performance on cast iron and stone. The durability is 20% higher than the normal products.

Highest Productivity And Performance In Cutting

MORE PICTURE

TRANSPORT PACKAGE

SPECTIFICATION